Do plastic particles now, do you have a market? Is there a profit?

According to the market market in 2004, most people who have done regeneration have better income. As friends who are preparing to invest, in the examination stage, the process is simple, the equipment investment is small, and the product is basically supply. The skills are not high, and most people can do it well. At the same time, the raw materials are the most familiar things around us. You can see everywhere and you can buy it everywhere. Roughly, for example, it can be received for 2,000 yuan in waste, and the product can be sold for 4,000 yuan, which is definitely a favorable map. Therefore, many people buy the device and get up. Most friends started to make the main: fiber bag (PP woven bag) granules, large shed membrane granules, plastic bottle crushing materials, and so on.
2, the problem followed by it is the problem of equipment use:
1). The equipment performance is not familiar, and there are too many problems during the use process. The automatic temperature control system depends on the experience). The product cannot meet the expected requirements, the color is not good, the brushes are severe, the output is low, the filter is often blocked, the grains are not uniform, and the adhesion is severe.
2), the sorting of the raw materials is unclear, the cleaning is not in place, the impurities are large, the broken strips are serious, and the color is not good. The same raw material, the same way, the product is not as good as others, and the price is very different.
3), the problem of raw material procurement, usually recycled plastic everywhere. When you form mass production, the raw materials cannot guarantee the supply. Wait water, pack stones.
4), sales question: The product does not know who sells it to, I do n’t know what the price, and even say that your material has such problems.
A more than the beginning of production, it is impossible to form batch production, and the amount is small or not, because customers need to carry a car to load the car. 2T-3T is not easy to sell. Essence
mad, HDPE, LDPE, PP membranes are not clear at all, PET, PVC bottle material is unclear, and so on.
Once the quality is unqualified, or the output is low, or the gain rate is low, I don’t know what to do in the next step. It is not easy to ask for advice. Some of the general peers are still conservative.
The above -mentioned situation is a friend’s consultation problem that the company often encounters. Of course, the situation varies from person to person and cannot be generalized. However, there are still some representativeness. In response to the above issues, some suggestions are made for reference only, and we are welcome to discuss together to help friends who have just entered the industry, that is, our future peers will develop better.